Till next time
Till next time
The Innokin Kroma Vape System – 75Watts of Temperature Control Power in an Ultra-Compact 72mm design, fitted for maximum grip.
The Innokin Kroma Vape System – 75Watts of Temperature Control Power in an Ultra-Compact 72mm design, fitted for maximum grip.
The Innokin Kroma Vape System is powered by the smooth precision of 75Watt Aethon Temperature Control Chipset (SS316L, Ni200, Titanium) with dry hit prevention.
Durable inset Stainless Steel 510 threading reduces the height even further when using the Innokin SlipStream 2ml tank and the included adapter allows the use of all 510 atomizers.
The high quality bright OLED clearly displays all important information and the power and ‘+’ – ‘-‘ adjustment buttons raise or lower temperature or watts in .5 increments.
The Kroma is extremely compact, fast and powerful with an internal 2000mah battery with 2Amp MicroUSB Quick charge and Vape while charging technology.
The delrin drip tip will bring increased airflow and provide you with powerful draw effects.
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of tank.
Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.
1 . Before starting make sure your hands are clean
2. Taking RBA deck apart.
3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.
5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically toensure the resistance remains the same.
H-Priv Pro Kit consists of H-Priv 220 mod and TFV8 Big Baby tank. Simple and hard lines make the kit looks very fashionable; it delivers a satisfying amount of vapor at 220W maximum output and comes with adjustable airflow system of TFV8 Big Baby tank, for different vaping experiences. Big fire key brings you astonishing experience.
This is an innovative design! The fire key of H-Priv combines the inconspicuous fire key with the mod well. Then your friends will ask that: “Where is the fire key?
H-Priv mod has the largest output power of SMOK brand. It compatibles with all atomizers and RTA series atomizers, you can enjoy vaping freely by it
In addition to its portability and compact size, H-Priv has a fundamentally improvement in finish. The new paint finish adds a shiny look and soft feel, and is more durable than an oxidized one. What’s more, it provides more eye catching colors for you to choose.
H-Priv battery cover uses injection molding, and designed with 8 venting holes and magnet holding features to make battery replacement easier. The 24k gold plated positive and negative terminals has high electrical conductivity. Along with visible & clear battery installation indication and insulation layer protection, H-Priv is safer to vape.
Aspire PockeX Pocket AIO
Being just a bit shorter than the iPhone 5s, the Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Packed with a 0.6Ω stainless steel Nautilus X U-Tech coil, the PockeX is a sub-ohm device. The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production.
PockeX’s discrete size and low-profile sub-ohm vapor production makes the PockeX your must-have vape while indoors or on-the-go.
Available in Matte Black, Rose Gold, Pantone White and Stainless Steel, pick your favorite PockeX color today.
Compact 11.77cm*1.97cm dimensions allow you to slide the PockeX into literally any pocket, bag or enclosure. The PockeX is one of the shortest tube shaped pocket AIO’s offering superb flavor and dense vapor production.
The PockeX introduces top-filling in an innovative new way. The atomizer screws into the top cap instead of tank bottom. This allows you to replace the atomizer without draining E-Liquid from tank. PockeX’s top fill design allows you to drip, drop or pour E-liquid into the 2ML tank.
1*PockeX AIO (0.6Ω Atomizer Pre-installed), 1* Extra Replacement Coil, 1* Micro-USB Cable, 1* User Manual, 1* Warranty Card
The Archon is a powerful new mod from Aspire. The Archon is a dual bay 18650 battery mod which delivers up to 150 watts of power. The Archon has a strong magnetic battery cover which slides off for easy access to battery bay. Archon’s operation is simplified with one-button selection between Wattage and Temperature Control (TC) modes. The Archon has a nice ergonomic design which ensures it feels just right while vaping. The Archon is available in three smart color options. Feel the power and privilege of the Archon mod today.
Insert two 18650 batteries in the battery bay; Please pay attention to the positive (+) and negative (-) cue above the bay. Slide the magnetic battery case onto the Archon mod.
http://www.aspirecig.com/products/MOD/mod376.html