Vaper Expo UK – The Return Video 14th – 16th October

Till next time

 

Advertisements

Kroma Vape System profile

kroma-vape

The Innokin Kroma Vape System – 75Watts of Temperature Control Power in an Ultra-Compact 72mm design, fitted for maximum grip.

kroma-tc-vape

The Innokin Kroma Vape System  – 75Watts of Temperature Control Power in an Ultra-Compact 72mm design, fitted for maximum grip.
The Innokin Kroma Vape System is powered by the smooth precision of 75Watt Aethon Temperature Control Chipset (SS316L, Ni200, Titanium) with dry hit prevention.
Durable inset Stainless Steel 510 threading reduces the height even further when using the Innokin SlipStream 2ml tank and the included adapter allows the use of all 510 atomizers.
The high quality bright OLED clearly displays all important information and the power and ‘+’ – ‘-‘ adjustment buttons raise or lower temperature or watts in .5 increments.
The Kroma is extremely compact, fast and powerful with an internal 2000mah battery with 2Amp MicroUSB Quick charge and Vape while charging technology.

kroma-vape

 

kroma-vape

 

TFV8 BABY

STRUCTURE DESIGN

DELRIN DRIP TIP

The delrin drip tip will bring increased airflow and provide you with powerful draw effects.

ADJUSTABLE AIRFLOW SYSTEM

Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of tank.

V8 BABY CORE

TOP REFILL SYSTEM

Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.

HOW TO BUILD THE RBA

1 . Before starting make sure your hands are clean
2. Taking RBA deck apart.

3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.

5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.

8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically toensure the resistance remains the same.

H-PRIV PRO

H-PRIV PRO

ASTONISHING PERFORMANCE

H-Priv Pro Kit consists of H-Priv 220 mod and TFV8 Big Baby tank. Simple and hard lines make the kit looks very fashionable; it delivers a satisfying amount of vapor at 220W maximum output and comes with adjustable airflow system of TFV8 Big Baby tank, for different vaping experiences. Big fire key brings you astonishing experience.

WHERE IS THE FIRE KEY?

This is an innovative design! The fire key of H-Priv combines the inconspicuous fire key with the mod well. Then your friends will ask that: “Where is the fire key?

220W POWER FOR VAPING!

H-Priv mod has the largest output power of SMOK brand. It compatibles with all atomizers and RTA series atomizers, you can enjoy vaping freely by it

OUTSTANDING PERFORMANCE & COLORFUL FINISH OPTIONS

In addition to its portability and compact size, H-Priv has a fundamentally improvement in finish. The new paint finish adds a shiny look and soft feel, and is more durable than an oxidized one. What’s more, it provides more eye catching colors for you to choose.

NEW BATTERY COVER DESIGN

H-Priv battery cover uses injection molding, and designed with 8 venting holes and magnet holding features to make battery replacement easier. The 24k gold plated positive and negative terminals has high electrical conductivity. Along with visible & clear battery installation indication and insulation layer protection, H-Priv is safer to vape.

SLOT DESIGN BATTERY COVER

MORE CONVENIENT AND SAFER

STRUCTURE DESIGN