Tag Archives: aspire
Aspire Breeze
-
Aspire Breeze
- Introducing the all new Aspire Breeze. The Breeze is our latest all-in-one device that employs a compact and ergonomic design, no matter how you hold or grip it, it feels good in the hand. The breeze has a built-in refillable tank that holds 2ml of e-juice and is compliant with TPD regulations. It also utilizes our U-tech coil which ensures you a flavorful vape. Not only that, its auto-fire feature adds even more convenience to your daily vaping, no need to press the fire button, just inhale from the drip tip and it will work for you. The fire button also helps further navigate the Breeze.
-
Aspire Breeze Dimensions
-
Aspire Breeze Automatic on/off
- In addition to its simplicity and good looking in design, the Breeze is also super easy to use, just inhale from the drip tip without pressing the fire button, the breeze will work for you. Make sure the Breeze has been filled with e-juice before taking a inhale.
Note: 1. Never blow directly into the mouth piece as this could potentially burn the coil and may cause a fire hazard.
2. Replace the drip tip protective cap when the Breeze is not in use.
-
Aspire Breeze filling
- Fill the Breeze from the top, pull off the drip tip section, unscrew and remove the chimney unit, you can add your preferred e-juice into the tank. Be aware of the max fill line when filling the Breeze.
-
Aspire Breeze Atomizer
- The Breeze employs U-tech coil to ensure a flavorful vape (Breeze U-tech coils are not interchangeable with Nautilus X U-tech coils.)
-
Aspire Breeze Exploded View
-
Aspire Breeze Charging
- The Breeze can be charged from its Micro-USB charging port, maximum charge current can reach up to 800mA. You can also charge the Breeze by using the charging dock for more convenience.
-
Aspire Breeze Charging Dock (Optional)
- Charging Dock Specs:
Capacity: 2000mAh
Output Specs: 5V/1A
Input Specs: 5V/2A
Share this:
Aspire Zelos 50W TC Box MOD – 2500mAh
Zelos, a compact and ergonomic vaping mod from Aspire powered by a 2500mAh built-in Li-Po battery. Wattage can reach up to 50W. It has variable voltage and wattage settings. In addition to its precise TC settings, the new firmware ensures its wattage can also be adjusted under the TC mode, with all that together added with a stylish design, makes the Zelos a smart choice for your vaping needs.
Parameters
Zelos 50W MOD
Size: 78mm (H) x 23(W) x 40mm (L)
Wattage Range: 1 – 55W
TEMP Range: 200 – 600F/ 100 – 315℃
Modes: VW/VV/Bypass/TC-Ti/TC-Ni/TC-SS
Thread: 510 thread
Charging port: USB charging port
Battery: built-in 2500mAh Li-Po battery
Material: Aluminum
It comes with
- 1x Zelos 50W MOD
- 1x USB cable
- 1x User Manual
FEATURES
Sleek user-friendly design
Stylish modern colors
Anodized Aluminum material
Automatic display adjustment
Share this:
Aspire PockeX Pocket AIO
Aspire PockeX Pocket AIO
Being just a bit shorter than the iPhone 5s, the Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Packed with a 0.6Ω stainless steel Nautilus X U-Tech coil, the PockeX is a sub-ohm device. The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production.
PockeX’s discrete size and low-profile sub-ohm vapor production makes the PockeX your must-have vape while indoors or on-the-go.
Available in Matte Black, Rose Gold, Pantone White and Stainless Steel, pick your favorite PockeX color today.
Compact 11.77cm*1.97cm dimensions allow you to slide the PockeX into literally any pocket, bag or enclosure. The PockeX is one of the shortest tube shaped pocket AIO’s offering superb flavor and dense vapor production.
The PockeX introduces top-filling in an innovative new way. The atomizer screws into the top cap instead of tank bottom. This allows you to replace the atomizer without draining E-Liquid from tank. PockeX’s top fill design allows you to drip, drop or pour E-liquid into the 2ML tank.
1*PockeX AIO (0.6Ω Atomizer Pre-installed), 1* Extra Replacement Coil, 1* Micro-USB Cable, 1* User Manual, 1* Warranty Card
http://online.aspirecig.com/aspire-p-221.html
Share this:
Aspire Archon 150w Mod
The Archon is a powerful new mod from Aspire. The Archon is a dual bay 18650 battery mod which delivers up to 150 watts of power. The Archon has a strong magnetic battery cover which slides off for easy access to battery bay. Archon’s operation is simplified with one-button selection between Wattage and Temperature Control (TC) modes. The Archon has a nice ergonomic design which ensures it feels just right while vaping. The Archon is available in three smart color options. Feel the power and privilege of the Archon mod today.
Insert two 18650 batteries in the battery bay; Please pay attention to the positive (+) and negative (-) cue above the bay. Slide the magnetic battery case onto the Archon mod.
http://online.aspirecig.com/aspire-p-224.html
Share this:
Aspire NX30
- The NX30 mod is a compact mod that can be used when on the go. Powered by a built-in LiPo battery, the NX30 supports up to 30 watts. The NX30 is the perfect size for low profile tanks. Take this essential battery mod wherever you travel for a more convenient vape.
-
NX30 MOD Structure
NX30 MOD Specifications
NX30 Package Contents
- 1* NX30 Mod / 1* USB Cable 1* User Manual / 1* Warranty Card / 1*ego adapter / 1* Lanyard Strap
http://www.aspirecig.com/products/MOD/mod376.html
Share this:
Aspire Quad-Flex Survival Kit
Aspire Quad-Flex 4-in-1 is a game changer. Rip up the vape rule book. Graduate to the different levels of vaping at your own pace. The Quad-Flex System provides the ultimate multi-device package complete with four configurations of atomizer in one streamlined kit. From the refined flavor beast and those who enjoy traditional tight pulls, to vaping cloud chasers, the Quad-Flex covers all bases.
Quad-Flex 4-in-1: Four ways to Flex, survive any situation with the following quick-fit configurations:
*Quad-Flex RDTA – drop-wick tank with dual or single Airflow
*Quad-Flex RDA with Turboline Side Airflow
*Quad-Flex squonker (bottom feed) RDA with Turboline Top Airflow
*Nautilus X 2ML Top Airflow flavor tank
Aspire Quad-Flex Accessories
Aspire Quad-Flex RDTA
To configure the Quad-Flex RDTA, connect the Nautilus X Base Hardware to RDA deck using the RDTA tank adapter. The Quad-Flex RDTA configuration supports dual or single airflow. The Quad-Flex comes with two adjustable airflow sleeves. There is a Top Airflow and a side Airflow Sleeve. Interchange according to your airflow preferences.
The Quad-Flex is available in Stainless steel and Black.
Aspire Quad-Flex RDTA Exploded View
510 Drip Tip Compatible
The Quad-Flex RDTA comes with a 510 Adapter so you can use your own drip tip. Lift the Wide Bore Drip Tip off and screw the 510 Adapter onto the top hardware.
Wick the RDTA
To wick the RDTA, push the cotton down the RDA deck’s 4 wicking holes. Cut the cotton where it hangs to halfway down the Pryex tank.
RDTA Filling
The RDTA can be filled through the bilateral e-liquid holes of RDA deck well using a syringe dropper; You can also drop the RDA top up so it is still touching the tank at a 30 degree angle and drop, drip or pour directly into the Pyrex tank. Please be careful not to lift the RDA top up too much or the cotton will be misplaced.
Aspire Quad-Flex RDA
Screw the RDA base to the RDA Deck to make a low-profile RDA tank.
The Quad-Flex RDTA configuration supports dual or single airflow. The Quad-Flex comes with two adjustable airflow sleeves. There is a top airflow and a side airflow sleeve. Interchange according to your airflow preferences.
RDA Exploded View
Aspire Quad-Flex Squonker (Bottom-Feed) RDA
Aspire Quad-Flex Squonker a.k.a. bottom feed RDA is the first of its kind. Just change out the RDA screw with the bottom-feed capillary screw and start squonking. Use the top-airflow sleeve when squonking. Aspire’s innovative new squonker screw there is sufficient capillary action to return the excess e-liquid to the bottom tank
Squonker RDA Exploded View
Aspire Quad-Flex Nautilus X Tank
Quad-Flex’s Nautilus X Coil is rated at 1.8Ω (12-16 watts). The Nautilus X Coils incorporate U-Tech, the latest coil technology. Vapor flows through the U-shaped chamber and passes the Kanthal coils twice before being inhaled. This all-new airflow performance allows for unrivaled flavor and E-Liquid taste.
Aspire Quad-Flex Kit Contents
- 1* Quad-Flex RDTA / 1* Replacement Nautilus X 2ml Pyrex / 1* Nautilus X Top Hardware /
1* 510 Drip Tip Adapter / 1* Capillary Screw / 1* Top Hardware with Top Airflow / 1* RDA Base
1* Nautilus X 1.8ohm Coil / 1* Baggy of Organic cotton / 1* Allen Wrench
2*Pre-Built Clapton coils / 4* Extra Grub Screws / 1* Extra O-ring Sets
Share this:
Aspire vaping Show in Shenzhen IECIE
Aspire Plato
Aspire Plato
Introducing the Aspire Plato. An all in one personal vaporizer and tank system that fits in the palm of your hand. The Plato brings you temperature control and normal wattage mode up to 50 watts along with adjustable airflow, but that isn’t all. This little marvel also has multiple coil options so whether you enjoy a mouth to lung style or a direct to lung style the Plato has you covered. Simple but Complete!
Dimensions
A sleek and elegant look.
Colors
The Plato is available in a variety of color options.
Subohm setup for direct to lung vaping
The Plato includes a Delrin drip tip for use with the subohm atomizer system.
Subohm atomizer cartridge
with a 0.4 ohm kanthal Clapton coil.
Remove the drip tip, then unscrew the top of the tank system with either the provided key or a coin. Then pull out the cartridge and replace with a new one. Now screw on the top of the tank system and replace your drip tip.
BVC setup for mouth to lung vaping
The Plato includes a stainless steel drip tip for mouth to lung vaping.
BVC cartridge that mates to standard
Nautilus coils. It comes with a Kanthal
1.8 ohms coil preinstalled.
Remove the drip tip, then unscrew the top of the tank system with either the provided key or a coin. First unscrew the cartridge’s arrestor and then remove the old atomizer. Next tighten the arrestor and then install your new atomizer and rescrew the tank system into the Plato. Now screw on the top of the tank system and replace your drip tip.
Filling
The Plato’s tank system is very convenient. Having two juice ports filling, draining, and cleaning are easy!
(Note, the upper hole is worked as both ejuice inlet and outlet, open both holes to drain the tank)
Airflow
The Plato’s adjustable airflow system allows you to dial in your desired amount of airflow or resistance to your liking.
Components
The Plato is easy to disassemble which makes for easy cleaning and atomizer replacement.
Battery ejection
To remove the battery from the Plato simply press on the battery through the cut away.
Firmware
The Plato’s firmware can be updated via the micro usb port. Check http://www.aspirecig.com/upgrade/ to get the latest version.
Contents
- The Plato comes with the Plato itself, 0.4ohm sub ohm coil and 1.8ohm nautilus coil for satisfying bold vapor experience and medium vapor experience,a stainless steel and a Delrin drip tip, an 18650 cell, two extra seals with rubber stops, a micro usb chord, and a key for changing atomizers.
Share this:
Aspire Company show
~Vapelounge~ 
You must be logged in to post a comment.