Dangers Of Vaping Centered On Bad Products

are ecigs bad for you

The news media loves to talk about the dangers of vaping, even the fictional dangers that don’t scientifically exist. This isn’t a surprise, or at least it shouldn’t be. We all know that the media has a much better time with their ratings if they are scaring people. Just imagine you see a teaser for the news. It has ominous music and the narrator says “ecigs are very trendy, but the dangers of vaping are real and we’ll tell you about them tonight on the 10 o’clock news.” Think people are going to tune in to find out?

Of course they are. That’s just how the media game works and it is something you pick up on quite quickly if you just pay a little attention. That’s how the “if it bleeds, it leads” phrase became so well known. When that average American does turn on his or her nightly news broadcast feature about electronic cigarettes, they will undoubtedly be flooded with a bunch of scary threats. Lots of rumor and assumptions will come up and very soon they will end up thinking that the dangers of vaping are terrible. At the least, they’ll think that the benefits are far outweighed by those dangers.

There will obviously be comparisons made the analogue cigarettes, but they’ll stress the similarities. They’ll tell you how you are still ingesting nicotine and they’ll paint it in a way that leads you to believe nicotine is bad for you. In fact, that isn’t really the truth at all. They may tell you that there are dangers of second hand vaping, just like second hand smoke. Once again, that isn’t the truth either and nobody has scientifically proven that it is. All of these claims about the dangers of vaping are made by connecting dots that don’t really connect. But there is one danger that we know exists, and that is the one you should really be focusing on.

 

Real Dangers Of Vaping Products Exploding

Dangers Of Vaping Bad Products


Batteries are at the heart of the dangers of vaping, but it isn’t as if you should stop vaping (or not start at all). While the dangers of second hand vaping is pretty much a myth, there is real solid proof of this phenomenon of ecig batteries exploding.

We won’t paint a pretty picture here, because the reality is that it is beginning to get out of hand. Just in last week we have seen numerous news reports of people being injured by exploding ecig batteries.

But the news of an explosion that injured a mother of two in England and the one that injured a teenager in Canada are related. Just like they are related to the man in New Hampshire who suffered burns due to an ecig exploding. All of these incidents have to do with the real dangers of vaping; buying bad products.

We don’t mean bad products because they are overpriced. Nor do we mean to say they just don’t taste good or don’t produce the amount of vapor you want. No, we mean bad products because they don’t go through proper quality control. While most electronic cigarettes are made at least partly in China, there is a mammoth difference between purchasing from a reputable brand and something on a non-branded site or simply from ebay. It may be cheaper, but it heightens the dangers of vaping exponentially.

It’s true that sometimes there are faulty products and that can happen in any industry. But there is also a reason we don’t see anything negative like this in the news about any of the top brands we recommend. These are companies that have a reputation to uphold and so they take all the necessary precautions, and even the precautions that aren’t necessary. Whether driven out of a concern for their consumers or a concern for their public image, you’ll be hard-pressed to see anyone working harder to make sure that the product you buy doesn’t fail in such a dramatic way as to explode or otherwise put you in danger.

The other thing that is going on is the serious concern regarding counterfeit ecigs. Fakes are everywhere. The dangers of vaping have been exacerbated by the sheer volume of clone ecigs on the market. You will find cloned ecigs and vaping products all over the internet and sometimes even in vape shops. How bad is the problem? Here are some numbers that will shock most of you.

There are a handful or world-class ecig manufacturers in China. Eight Aspire, Kangertech, Smok, Innokin, Joyetech and a few others are exceptional. They make some of the best vaping products in the world. They have strict quality control and use only the best materials. These companies are located in an industrial area of Shenzhen, China. Within that same are are 600 ecig factories. 600!

Most of those factories are producing terrible knockoffs at rock bottom prices. The fakes look just like the real thing. They are being sold online through a number of retail and wholesale websites. Even vape shop owners are being fooled by some of these products. This is a serious problem and results in a lot of bad press for the industry when one of these clone ecigs is the root cause of some well publicized ecig accident.

If you are interested in a Kanger, Aspire, Joyetch product, you need to buy from a reputable source that knows what they are doing. The vaping business is booming and pretenders and fakes are trying to cash in as are the brands that are just blatantly selling junk! With no regulation in place it is buyer beware.

The real culprit here is greed. The dangers of second hand vaping aren’t real, nor are all these other accusations that just stoke people’s fears. No, the dangers of vaping lie in cheap ecigs. That’s why the FDA should be worried about cheap ecigs instead of fruity ecig flavors. As a consumer, make sure that these harrowing stories in the news don’t put you off from making the switch to vapor. All you have to do is make sure you buy from the right sources and you’ll be well on your way to leaving traditional tobacco cigarettes behind you, as well as ridiculous claims about the dangers of vaping.

VapeCige VTBox200 200W TC VV / VW Mod

VTBox200 is powered by authentic DNA 200 chip by EVOLV. DNA 200 is a power regulated DC-DC converter with digital switch-mode for personal vaporizers. It features Evolv’ s patented wattage control, temperature Protection, preheat, OLED screen, and waterproof onboard buttons. The DNA 200 runs from 3 cell lithium polymer battery, and features cell-by-cell battery monitoring and integrated 1A balance charger. It is the most advanced personal vaporizer.

Main Features:
Authentic DNA 200 chip by EVOLV
Temperature control range from 200-600 Fahrenheit degree
Output wattage from 1-200W
Output voltage from 0.5-9.0V
The lowest resistance: 0.1ohm
Material: T6 senior aviation aluminum, spray paint appearance and corrosion logo
Detachable magnets back cover, convenient to replace battery
Replaceable lithium battery: 1800 mah 11.1 V-35c-60.5A-3s, with tinned copper wire plated copper wire and 14 mm wire size, conductor resistance 15.6 ohm/km, supporting max 55.6 A

Modes:

Locked mode: Pressing the fire button five times with less than 0.7 seconds it will cause the device enter lock mode. In locked mode, the device will not fire and the output power will not adjust accidentally. While in locked mode, the screen will be off, except that pressing a button will show  “Locked, Click 5 X”. To Exit locked mode, press the fire button 5 times.

Stealth mode: While locked, holding the fire and down buttons simultaneously for 5 seconds, it will switch to stealth mode. In this mode the display is off, it will still show error and lock messages. To switch back to normal display mode, hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed.

Power Lock mode: Holding down both the up and down buttons for 2 seconds, it will place the device in Power Locked mode. In this mode, the mod operate normally, but you are not able to change the power setting. This mode prevents accidental power level from being changed due to the buttons being pressed while in a pocket. To Exit power locked mode, hold the up and down buttons for 2 seconds.

Resistance lock: The DNA 200 relies on the cold resistance of the atomizer to measure temperature accurately. If the connection is not stable or if you find the measured resistance drifts with time, it may be desirable to lock atomizer resistance. To do so, while locked hold both the fire and up buttons for 2 seconds to enter resistance lock mode. In this mode, the DNA 200 will use the present atomizer cold resistance without refinement until the atomizer is disconnected or the resistance lock is disabled. A lock symbol will replace the ohm symbol on the display. To disable resistance lock, repeat the procedure to lock it.

Max temperature Adjust mode: From lock mode, holding down both the up and down buttons for 2 seconds, it will place the device in Max Temperature Adjust mode. Once this mode is entered, the max temperature will be displayed. The up and down buttons are used adjust the max temperature. To save the new temperature setting and exit, press the fire button.

Specifications

Product Details Type: Electronic Cigarettes Accessories
Accessories type : MOD
APV Mod Wattage Range: 151-200W
APV Mod Wattage: 200w
Voltage Range : 05-9.0 V
Temperature Control Range: 200-600 F
Battery Cover Type: Magnetic
Charge way: USB
Material: Aluminum
Available color: Assorted Colors
Dimension and Weight Product weight: 0.300KG
Package weight: 0.680 KG
Product size (L x W x H): 9.900 x 3.200 x 5.500 cm / 3.898 x 1.26 x 2.165 inches
Package size (L x W x H): 20.000 x 12.000 x 7.000 cm / 7.874 x 4.724 x 2.756 inches
Package Contents Package Contents: 1 x Mod, 1 x USB Cable, 1 x English Manual, 1 x Box, 1 x Polymer Battery

Panzer 200 watt

PANZER BOX 200W 4500MAH TEMPERATURE CONTROL VW VARIABLE WATTAGE APV BOX MOD – WHITE, 1~200W, POWERED BY EVOLV DNA 200 CHIP

Panzer box 200

Product Type VW
Color White
Material Aluminum Alloy
Charge Style AC/USB
Power Output 1~200W
Thread Type 510
Telescoping Mod No
Variable Voltage (VV) No
Variable Wattage (VW) Yes
Battery Type Fixed
Battery Capacity 4500mAh
Display 0.91″
Package 1 x Panzer Box 200 Mod, 1 x USB Cable, 1 x 3S Li-po 1500mAh battery, 1 x User Manual
Depth 55mm (2.17 inch)
Height 92mm (3.62 inch)
Width 30mm (1.18 inch)
Weight 226g (7.97oz)

MORE INFO

The Main Functions & Operations
1. Activated Mode & Attaching a new atomizer: To wake the device from power off state, tap the Fire button. The Panzer200 uses the resistance of the atomizer to calculate the temperature of the heating coil. It continually looks to see whether a new or changed atomizer has been connected.

If you are using temperature protection, be careful to only attach new atomizers that have cooled to room temperature to the device. If a new atomizer is attached to the Panzer200 before it has cooled down, the temperature may read and protect incorrectly until the new atomizer cools.

When you connect a new atomizer or disconnect and reconnect your existing atomizer, the Panzer200 will prompt you to confirm this change. When you fire the first time, before activating the Panzer200 will prompt “New Coil? LEFT YES/RIGHT NO”. When you see this prompt, if you have attached a new atomizer, press the LEFT button. If you have disconnected and reconnected the same atomizer, press the RIGHT button.

2. Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show “Locked, Click 5X”. To exit Locked mode, press the fire button 5 times.

3. Stealth mode: While locked, holding the fire and down buttons simultaneously for five seconds will switch to stealth mode. In this mode the display is off. It will still show error and lock messages. To switch back to normal display mode, hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed.

4. Power Locked mode: Holding down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change the power setting. This mode prevents accidental power level changes due to the buttons being pressed while in a pocket. To exit Power Locked mode, hold the up and down buttons for two seconds.

5. Power Preset Mode: Under the power locked mode, pressing the up / down buttons twice with less than 0.7 seconds between presses will cause the device to Power Preset mode, then press the fire button to confirm the selection.

6. Resistance lock: The Panzer 200 relies on the cold resistance of the atomizer to measure temperature accurately. If the connection is not stable or if you find the measured resistance drifts with time, it may be desirable to lock the atomizer resistance. To do so, while locked hold both the Fire and Up buttons for two seconds to enter Resistance Lock mode. In this mode, the Panzer200 will use the present atomizer cold resistance without refinement until the atomizer is disconnected or the resistance lock is disabled. A lock symbol will replace the ohm symbol on the display. To disable resistance lock, repeat the procedure to lock it.

7. Max. Temperature Adjust: From Locked Mode, holding down both the up and down buttons for two seconds will place the device in Max Temperature Adjust mode. Once this mode is entered, the max temperature will be displayed. The up and down buttons are used to adjust the max temperature. To save the new temperature setting and exit, press the Fire button.

Error Messages
The Panzer200 will indicate a variety of error states.

Check Atomizer: The Panzer200 does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.

Shorted: The atomizer or wiring are short circuited.

Weak Battery: The battery needs to be charged, or a higher rate battery needs to be used. If this happens, the Panzer200 will continue to fire the atomizer, but will not be able to provide the desired wattage. The Weak Battery message will continue to flash for a few seconds after the end of puff.

Temperature Protected: The heating coil reached the maximum allowed temperature during the puff. If this happens, the Panzer200 will continue to fire, but will not be able to provide the desired wattage.

Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this happens, the Panzer200 will continue to fire, but will not be able to provide the desired wattage. The Ohms Too High message will continue to flash for a few seconds after the end of puff.

Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this happens, the Panzer200 will continue to fire, but will not be able to provide the desired wattage. The Ohms Too Low message will continue to flash for a few seconds after the end of puff.

Too Hot: The Panzer200 has on board temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.

Auto power down
The screen will be at full brightness while firing. After 10 seconds with no button presses, the screen will dim. 30 seconds after the last button press, the screen will fade out and the device will go into sleep mode. To wake the device, press the fire button.

Charger
The Panzer200 has a built in 1A USB charger. It automatically detects the type of USB power supply it is connected to, so it can be plugged into standard PC USB ports or higher power chargers. The max charge current is based on the cell capacity as programmed in Escribe.

Cell-by-cell monitoring
The Panzer200 runs from a three cell battery. Because lithium polymer cells can be damaged by excessive discharge, with multi-cell series batteries it is important to measure each cell in the battery independently and stop firing the atomizer when any of the cells reaches the cutoff voltage. The Panzer200 uses the battery pack taps to monitor each cell.

Cell Balancer
During charging, is vital that none of the batteries charge beyond 4.2 volts per cell. If one of the cells in the battery has more charge than the others, its voltage will be higher. During charging, the Panzer200 will turn on a balancer to charge that cell slower than the others.

By monitoring and charging each cell individually, the safety of a multi-cell pack is equivalent to using a single cell. Many products, from power tools to laptops to electric vehicles, use multi-cell packs. All of them use cell by cell monitoring and balancing to operate safely.

Escribe
Escribe is a software package used to configure and modify the operation of your Panzer200. It installs on a Windows PC and connects to your Pan”200 using the USB port. When you connect your Panzer200 to the PC, press the “Connect and Download Settings” button to download the settings presently on your device to Escribe. After you make changes, press the “Upload Settings to Device” to save the new settings to the device.

Efusion DNA200

unnamed (3)

Main Features:
Powered by Evolv DNA200 chip
With Evolv’s Escribe software, dial in your perfect vape with over 93 options (Upgraded to newest firmware before shipping)
User serviceable lithium polymer 1300mAh 3 cell battery
Precision CNC milled 6061-T6 aluminum body
Dimensions: 85mm*60mm*25mm
Finishes: black, silver, gold, copper, sapphire blue, aqua  blue, red, green, purple
Standard cover material: Carbon fiber
Limited Edition: New Zealand Abalone Cover, Wood, Genuine Leather etc.

CLOUDMAKER WHITEOUT DNA

The Cloudmaker Whiteout DNA, the second configuration of Cloudmaker Tech’s modular, future-proof, user-customizable personal vaporizer. The Whiteout DNA unit comes fully-assembled & QC-tested with Evolv’s cutting-edge new customizable DNA200 Temperature Control chipset. The DNA200 can push up to 200W using a 1100mAh 3S LiPo battery configuration, and we are working on offering a 1300mAh expansion kit! The genius of the Whiteout is that you can interchange and customize every part of it, from changing the color and material of your device’s panels, to upgrading/swapping your chip itself without soldering or special skills. This future-proof flexibility is thanks to our modular design & specially-developed Build Kits, which are based on community requests and released regularly to expand the possible factory-supported configurations of the Whiteout.

Evolv DNA 200

Capture12

200 Watt Variable Power Module with Temperature Protection and USB The DNA 200 is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, OLED Screen, and waterproof onboard buttons. The USB port and Evolv’s EScribe software can be used to customize or monitor the user experience. The DNA 200 runs from a 3 cell lithium polymer battery, and features cellby-cell battery monitoring and integrated 1A balance charger. It is the most advanced personal vaporizer controller ever made.

Capture5646