SMOK NORD 4 (80W)

nord 4(80W) is an emblematic pod system kit with versatile capabilities, which can give full play to the performance

and advantages of the entire device. It has a built-in 2000mAh battery, enough to provide a maximum power of 80

watts. The kit comes with two 4.5ml nord 4 pods, one with an RPM 2 mesh coil and the other with an RPM

mesh coil. Besides, two air-inlet rings are cleverly designed on the top of the device for free adjustment of air intake.

We build this stunner for you, and you make it yours. Innovation keeps changing the vaping experience!

THE KIT INCLUDES

A NEW WAY TO BE CHIC

New thinking brings unique styles to the industrial design, which can inspire new sparks of innovation.

SPECIFICATIONS

80W MAXIMUM POWER

Up to 80 watts of horsepower, nord 4(80W) can easily handle all of your vaping needs,

allowing you to immerse in massive clouds and satisfying taste.

STEER YOUR VAPE

Two air flow control rings on both sides of the device like small steering wheels,

allowing you to rotate freely to obtain a mellow taste and high-quality vapor.

STAY POWERED THROUGHOUT THE DAY 
With an all-day 2000mAh battery life, nord 4(80W) is ready to work for as long as you need it.

CAPACITY THAT GETS NOTICED

With an unprecedented 4.5ml e-liquid capacity, the pod system can make a big difference.

TAKE CHARGE OF YOUR TIME

nord 4(80W) adopts USB Type-C, which can provide reliable power and faster transfer speed to achieve smooth charging.

 The maximum 1.4A fast charging brings continuous power for your efficient vaping life.

INTELLIGENT DETECTION 

Smart detection helps to better understand the device status.

HOW TO FILL WITH E-LIQUID

Do not inhale immediately after filling the tank. Let it stand for several minutes to get the cotton completely saturated.

1. Pull the pod out from device.

2. Pull out the rubber plug to open the filling port; then insert the nozzle of an e-liquid refill container into the filling port.

3. Push back and press firmly the rubber plug to close the filling port of the pod.

4. Install the pod back to the device.

Smok tfv12 prince cobra edition

TFV12 Prince Cobra Edition tank, an unprecedentedly powerful and beautiful one. It has a cobra mesh inside, when you dripped e-liquid in the tank you can see beautiful liquid fill every part of the cobra mesh! And with snakelike patterns carved on the top and base, the whole tank looks like an exquisite artwork. Its included V12 Prince strip coil is a revolutionary one, having larger heating area and can bring you purer flavor. Besides, acrylic bulb tube and drip tip are included in this kit as extra gifts! Excellent design, powerful new coils, this cobra edition will surprise you! Innovation keeps changing the vaping experience!

10 COLORS AVAILABLE

 

THE KIT INCLUDES

SPECIFICATIONS

COMPONENTS

EXCELLENT ACCESSORY
— COBRA MESH

Cobra Mesh is not only one of the most stable structures but also a beautiful masterpiece.
with it in the tank, the coil can be completely enveloped and when you pour e-liquid in you can see “the shape of e-liquid”!

TFV12 PRINCE COBRA WITH GLOBAL GLASS TUBE

ACRYLIC DRIP TIP & BULB TUBE

Different from the traditional cylindrical drip tips , this new acrylic one has radian on its body,making it more suitable to your mouth. And the acrylic bulb tube has colorful and high-pellucidity appearance, you can clearly see the e-juice through it. More importantly, we use high quality acrylic, which ensures non-toxic and high temperature resistance.

YOU CAN BUY THESE COBRA V2 RESIN DRIP TIPS SEPARATELY!

TFV12 PRINCE CORES

TOP REFILL SYSTEM

Top rotary refill makes filling a easy thing. Leak proof slot can significantly solve leaking problem.

 

SMOK G150 KIT

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

Parameters

G150 MOD
Size: 75 x 49 x 29mm
Capacity: 4200mAh
Power Range: 6W – 150W
Resistance Range: 0.1Ω-3Ω (VW) / 0.06Ω-3Ω (TC)
Temperature Range: 200℉–600℉/100℃–315℃

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

TFV8 BABY TANK
Material: Stainless Steel
Size: 24.5 x 56mm
Capacity: 5ml
Thread: 510

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

It comes with

  • 1x G150 MOD
  • 1x TFV8 Big Baby tank
  • 1x Baby-Q2 0.4ohm dual core (pre-installed)
  • 1x Baby-M2 0.15ohm dual core
  • 1x Replacement glass tube
  • 1x USB cable
  • 1x Manual
  • Spare parts

FEATURES

•    Large OLED screen
•    Max 150w power
•    VW/TC Modes
•    Multiple protections
•    Adjustable airflow system
•    Top refill system

 

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

SMOK G150 Kit with TFV8 Big Baby - 1900mAh

SMOK G150 Kit with TFV8 Big Baby - 4200mAh

 

AL85 KIT

AL85 KIT

LOVE LIKE THE BEAST

AL85 Kit, consists of AL85 mod and TFV8 Baby tank features with delicate design, smooth streamline and integrated functional buttons. You would enjoy thoughtful experience and innovative design from SMOK when its 85W output power combines with Cloud Beast TFV8 Baby tank. Vaping, just enjoy it.

THE KIT INCLUDES

SPECIFICATIONS

TOP BATTERY SLOT

AL85 is different from other mods with a top battery slot, which is powered by one 18650 battery and more convenient to replace.

85W POWER

AL85 is different from other mods with a top battery slot, which is powered by one 18650 battery and more convenient to replace.

MORE DETAILED VAPING DATA

The clear and precise OLED screen offers an entirely new operation interface. More vaping data for you, such as VW/TC/MEMORY MODE, vaping effect, voltage, battery life, resistance value etc.
Tips: There is a transparent protective layer on this side, you can rip it

GX 350

THE KIT INCLUDES

SPECIFICATIONS

CREATIVE DESIGN

UP/DOWN BUTTON

GX350 makes the UP and DOWN button combined which simplifies the operation. The details make a little change that reveals the elaboration from SMOK.

EASY-TO-READ OLED DISPLAY

 It presents all key pieces of information, including output wattage, output voltage, and atomizer resistance and remaining battery life, etc.

350W POWER

 Its output power can up to 350W when powered by 4 x 18650 batteries.

SMALLER SIZE

 The mod always has very heavy size when powered by 4 x 18650 batteries; while GX350 has reduced the whole size after precise calculation, which is smaller than other mods powered by 3 x 18650 batteries.

SHORTER PERIMETER

 Tridimensional polygon design has shortened the perimeter to 155mm, although it can carry 4 x 18650 batteries by the small size.

COMPONENTS

OPEN AND CLOSE BATTERY COVER

 User tips:Open the battery chamber by grip the two sides of the battery cover and direct pull. Close it by using the power of your center palm just like the video shows. Thanks!

YOU MAY TEAR OFF THE INSIDE PLASTIC TUBES

 It is strongly suggested that user should use standard size battery (Sony VTC series etc), but if it happens that your batteries is slightly bigger, you may tear off the internal plastic tubes!

 

TFV8 BABY

STRUCTURE DESIGN

DELRIN DRIP TIP

The delrin drip tip will bring increased airflow and provide you with powerful draw effects.

ADJUSTABLE AIRFLOW SYSTEM

Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of tank.

V8 BABY CORE

TOP REFILL SYSTEM

Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.

HOW TO BUILD THE RBA

1 . Before starting make sure your hands are clean
2. Taking RBA deck apart.

3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.

5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.

8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically toensure the resistance remains the same.

H-PRIV PRO

H-PRIV PRO

ASTONISHING PERFORMANCE

H-Priv Pro Kit consists of H-Priv 220 mod and TFV8 Big Baby tank. Simple and hard lines make the kit looks very fashionable; it delivers a satisfying amount of vapor at 220W maximum output and comes with adjustable airflow system of TFV8 Big Baby tank, for different vaping experiences. Big fire key brings you astonishing experience.

WHERE IS THE FIRE KEY?

This is an innovative design! The fire key of H-Priv combines the inconspicuous fire key with the mod well. Then your friends will ask that: “Where is the fire key?

220W POWER FOR VAPING!

H-Priv mod has the largest output power of SMOK brand. It compatibles with all atomizers and RTA series atomizers, you can enjoy vaping freely by it

OUTSTANDING PERFORMANCE & COLORFUL FINISH OPTIONS

In addition to its portability and compact size, H-Priv has a fundamentally improvement in finish. The new paint finish adds a shiny look and soft feel, and is more durable than an oxidized one. What’s more, it provides more eye catching colors for you to choose.

NEW BATTERY COVER DESIGN

H-Priv battery cover uses injection molding, and designed with 8 venting holes and magnet holding features to make battery replacement easier. The 24k gold plated positive and negative terminals has high electrical conductivity. Along with visible & clear battery installation indication and insulation layer protection, H-Priv is safer to vape.

SLOT DESIGN BATTERY COVER

MORE CONVENIENT AND SAFER

STRUCTURE DESIGN

 

 

TFV8 THE CLOUD BEAST

CLOUD BEAST

ERUPT INTO SKY, CONQUER THE WORLD

The ancient volcano, Mount Vesuvius, is a cloud beast entrenched into the earth. Although calm, the 2,000 foot diameter crater fills with steam; a formidable, gasping lion. Once awakened, she erupts lava into an ominous sky, and the earth trembles with her great power.

Now, SMOK brings you this magnificent power, completely changing your vaping experience. The TFV8, is the ultimate sub-ohm atomizer. The TFV8 utilizes 4 unique, patented Turbo Engines: V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), and the V8 RBA (4.0T-X). These add up to make the TFV8, a real Cloud Beast!

TFV8

SPECIFICATIONS

V8

GET TO KNOW THIS V8 ENGINE, NOW!

TFV8 – The top level sub ohm atomizer adopts 4 Unique Patented Turbo Engines: V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), and V8 RBA (4.0T-X),which makes it a real Cloud Beast! The revolution of coils and airflow make the TFV8 a high-performance vapor beast!

TURBO, TURBO, TURBO, TURBO

YOU MUST EXPERIENCE THIS TURBO V8 POWER!

Turbo, Turbo, Turbo, Turbo: Turbo Boosted Engine Coils, Turbo Boosted Bottom Air-slots, Turbo Boosted Heating Air-tube, and Turbo Boosted Drip Tip. These designs make TFV8 powerful!

There is no deafening ROAR! There are only irresistible clouds.

Are you ready?

TURBO

4 UNIQUE PATENTED TURBO ENGINES

V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), V8 RBA (4.0T-X),which makes TFV8 to be a real Cloud Beast!

YOU CAN’T MISS THE VERSATILE TFV8

Brand new V8-X4 is quadruple core, features with double-barreled pistol design; its power range is 60-150W (BEST 80-120W); it also features with cloud vapor chasing and pure taste. At the same time, V8 RBA-16 is recommended to you, it almost compatibles with all resistance value Clapton coils and you can DIY go-as-you-please; meanwhile, you can have a try with 0.32Ω and 0.54Ω coils.

V8 RBA FUSED CLAPTON HEATING COILS

V8 RBA FUSED CLAPTON HEATING COILS

TFV8 VS TFV4

TURBO

1 PAIR BIGGER BOTTOM AIR SLOTS

Compared with the small 4 air slots of TFV4, TFV8 has 2 bigger adjustable air slots on the bottom, with an increased airflow of 18%. It can be adjusted freely, which allows you to have a unique experience.

TURBO

BIGGER HEATING AIR TUBE

TFV8 increase its heating air tube to match the increased air slots for higher airflow efficiency. Its diameter increased by 15%, and area increased by 30% than TFV4 design.

TURBO

LARGE CALIBER DELRIN DRIP TIP

TFV8 sports a large caliber delrin drip tip, for increased airflow. Want to cloud out a room? This drip tip helps make that a definite possibility!

GREATNESS IS IN THE DETAILS

The finish design of TFV8 is the result of thousands of test-modified designs. Each part is carefully designed and the final, polished details are our commitment to bring the ultimate product to every vapor fan.

SUPER LAGER E-JUICE REFILL SLOT AND CENTRAL AIR CHAMBER

The refill slot and central air chamber of TFV8 tank is bigger than that of TFV4. This makes is more convenient to fill your tank and enjoy more massive clouds of vapor.

TOP REFILL SYSTEM

Top rotary refill design makes filling as easy as it gets.

HOW TO BUILD THE RBA

8 STEPS TO EASY GO

Before starting make sure your hands are clean.

Taking RBA apart.

Installing the pre-wrapped coil.
Place the coil between the posts and wrap the ends around the screws, and tighten up. Once in place, make sure the coil is fixed in the center and lined up with the air hole. Make sure the coil is NOT touching the base.

Position and cut the ends of wire off.

Cut a strip of cotton and make sure it’s not too much, and not too little.

Insert the cotton, and place it in the middle.

Cut the cotton at an angle. Make sure it’s not too short and not too long.

Wet the coil with your e-liquid and adjust the cotton. Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

GIFT IS COMING

If you book the pre-sold kit on the official website, you can get a T-shirt with the“SMOK V8” logo, as a gift. Only 100 are available, so pre-order now!